How Does The Air Compressor Cope With High Temperature Weather

In the scorching summer, high-temperature weather continues to swept across the country, and this time is also a high-incidence period when the failure rate of air compressors increases. It will stop the air compressor, and how to solve these problems?

    1. Ambient temperature: It is best for the air compressor to operate at an ambient temperature of 35-40 °C, and it is better if it is lower than this value, because half of the high temperature failure of the air compressor is caused by the ambient temperature.

     Solution: Improve the ventilation system in the air compressor room, such as adding exhaust fans and air ducts, and export the hot air generated by the air compressor out of the air compressor room to reduce the temperature of the air compressor room, thereby reducing the exhaust temperature of the air compressor. .

    2. Oil circuit system: As an air compressor lubrication system, it lubricates the compressor head, reduces the wear of moving parts, reduces the exhaust temperature and other air compressor oil temperature. Exhaust gas temperature.

     Solution: Check whether the oil circuit system is blocked, reduce the oil flow rate and the lubrication coefficient. Such as oil filter, heat exchanger (radiator), temperature control valve (thermostat valve), etc., check whether the lubricating oil is too low, leaking, etc., repair and replace the parts and pipelines that leak lubricating oil, and add appropriate amount of lubricating oil. If the lubricating oil is too dirty and there are many impurities (carbon deposits, gums, etc.), you should replace the new lubricating oil, clean the entire oil circuit system, replace the oil filter, and correct the temperature control valve.

    3. Compressor head: Damage to the moving bearing inside the compressor head will also cause the exhaust temperature to be too high. Listen to whether there is any abnormal noise in the compressor head and the bearing. The normal operation of the compressor with no damage to the bearing should be stable and the sound is dull. , If there is obvious impact sound, sharp sound, etc. in operation, it proves that the compressor head is seriously worn and the running bearing is damaged.

    Solution: replace the bearing of the nose, correct the bearing position, and correct the rotor of the nose. For example, if the casing of the compressor head has large wear on the rotor, it should be sprayed, because the wear is more serious, which will lead to a decrease in the exhaust volume of the compressor head.

    It can be seen that to solve the phenomenon of high temperature of air compressors in summer, it is necessary to start from various aspects such as indoor ventilation, air compressor oil circuit system cleaning, and compressor head correction. Therefore, reasonable maintenance of the air compressor is an important condition to ensure its working efficiency.